Subaru Crosstrek Service Manual: Transfer driven gear

Installation

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transfer ClutchINSTALLATION1. Install the thrust bearing.NOTE:Make sure to install in the right direction.2. Install the transfer clutch assembly.3. Sele ...

Adjustment

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transfer Driven GearADJUSTMENTNOTE:When the transfer driven gear or bearing is replaced, select the transfer driven gear shim. Transfer Clutch > ADJU ...

Other materials:

Removal
POWER ASSISTED SYSTEM (POWER STEERING) > Universal JointREMOVAL1. Adjust the tilt position of the column assembly - steering to the lowest position and lock the tilt lever.2. Remove the universal joint assembly - steering.(1) Place alignment marks on the universal joint assembly - steering.NOTE:P ...

BSD/RCTA OFF switch
BSD/RCTA OFF switch BSD/RCTA OFF indicator If the BSD/RCTA OFF switch is pressed, the BSD/RCTA OFF indicator appears on the multi information display of the combination meter, and the BSD/RCTA is deactivated. Press the switch again to activate the BSD/RCTA. The BSD/RCTA OFF indicat ...

Inspection
FRONT SUSPENSION > Front StrutINSPECTIONCheck the removed part for wear, damage and cracks, and then repair or replace it if defective.1. STRUT1. Check for oil leaks.2. Move the piston rod up and down to check that it operates smoothly without any hitch.3. Check the piston rod runout.Preparation ...