Subaru Crosstrek Service Manual: Adjustment

NOTE:

When the transfer driven gear or bearing is replaced, select the transfer driven gear shim. Transfer Clutch > ADJUSTMENT">

Transfer driven gear

Removal

Other materials:

Removal
EXTERIOR/INTERIOR TRIM > Front GrilleREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the bumper face - front. Front Bumper > REMOVAL">3. Remove the front grille assembly.(1) Remove the screws from the back side of the bumper face - front.(2) Release the cl ...

Inspection
POWER ASSISTED SYSTEM (POWER STEERING) > Steering ColumnINSPECTION1. UNIT INSPECTIONCheck the following items, and if there is anything out of standard value, it is considered to be damaged. If so, replace it with a new part.• Measure the whole length of the column assembly - steering.Stand ...

Dtc b1795 occupant detection module internal circuit
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1795 OCCUPANT DETECTION MODULE INTERNAL CIRCUITDIAGNOSIS START CONDITION:Ignition voltage is 8 V to 16 V.DTC DETECTING CONDITION:Occupant detection control module is faulty.When “DTC B1795 ...