Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Specification

CONTROL SYSTEMS > General Description

SPECIFICATION

Item

Specifications

Swing torque of rod against lever

N (kgf, lb)

3.7 (0.38, 0.83) or less

Caution
CONTROL SYSTEMS > General DescriptionCAUTION• Wear appropriate work clothing, including a cap, protective goggles and protective shoes when performing any work.• Remove contamination in ...

Component
CONTROL SYSTEMS > General DescriptionCOMPONENT1. AT SELECT LEVER(1)Grip sub ASSY (model with gate shifter)(14)Spacer pin guide(27)Nut(2)Clamp grip pin(15)Plate COMPL(28)Button ASSY-AT(3)Cover grip ...

Other materials:

Removal
LIGHTING SYSTEM > Front Fog Light BulbREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the screw and clips, and turn over the front side of the mud guard - front.3. From the bottom of the bumper face - front, remove the front fog light bulb.CAUTION:Use a dry clean clot ...

Dtc u0416 invalid data received from vehicle dynamics control module
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0416 INVALID DATA RECEIVED FROM VEHICLE DYNAMICS CONTROL MODULEReceived error data from VDC CM.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROC ...

Clear memory mode Operation
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Clear Memory ModeOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Select System» di ...

© 2016-2026 Copyright www.sucross.com