Subaru Crosstrek Service Manual: Removal
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Air Breather Hose
REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the clip (A) from the air intake boot.
3. Loosen the clamp (B) connecting the air intake boot and air cleaner case (rear).
4. Loosen the clamp (C) which connects the air intake boot and throttle body.
5. Remove the air intake boot from the throttle body, and move it to the left side wheel apron.
6. Remove the air breather hose.
Inspection
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Air Breather HoseINSPECTIONCheck the hose for peeling, crack or clogging. ...
Installation
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Air Breather HoseINSTALLATIONInstall in the reverse order of removal.Tightening torque:Air intake boot3 N·m (0.3 kgf-m, 2.2 ft-lb) ...
Other materials:
Dtc c1541 clutch switch off malfunction
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1541 CLUTCH SWITCH OFF MALFUNCTIONNOTE:For the diagnostic procedure, refer to “DTC C1542 CLUTCH SWITCH ON MALFUNCTION”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) & ...
Tool locations
Jack handle
Tool bucket
Spare tire
Wheel nut wrench
Screwdriver
Jack
Towing hook (eye bolt)
A jack handle is stored under the floor of
the cargo area. A jack and a towing hook
are stored in the tool bucket that is located
in the recess of the spare tire wheel.
Als ...
Dtc c0071 no signal from steering angle sensor
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C0071 NO SIGNAL FROM STEERING ANGLE SENSORDTC detecting condition:Communication from steering angle sensor is faulty.Trouble symptom:• VDC does not operate.• EyeSight does not ope ...
