Subaru Crosstrek Service Manual: Relay and fuse

Procedure

HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Refrigerant Pressure with Manifold Gauge SetPROCEDURE1. REFRIGERANT GAS PRESSURE INSPECTION1. Prepare the vehicle.NOTE:Check that the ambient temperature ...

Inspection

HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Relay and FuseINSPECTION1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.NOTE:If the fuse is blown again ...

Other materials:

Engine oil
CAUTION If the oil level gauge in your Subaru Ascent does not slide out easily, gently rotate it left and right before pulling. Applying excessive force may lead to sudden release and possible injury. Always use engine oil that meets the recommended grade and viscosity specified for t ...

Removal
EXTERIOR/INTERIOR TRIM > Floor MatREMOVALCAUTION:• Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">• Airbag system satellite safing sensor is lo ...

Dtc p0507 idle control system rpm - higher than expected
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0507 IDLE CONTROL SYSTEM RPM - HIGHER THAN EXPECTEDDTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:Engine keeps running at higher speed than specified idl ...