Subaru Crosstrek Service Manual: Oil pump

Installation

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Oil Pan and StrainerINSTALLATION1. Clean the mating surface of oil pan and transmission case.2. Install the O-ring to the oil strainer.NOTE:• Use n ...

Inspection

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Oil PumpINSPECTIONCheck the following items.• Check the oil pump for damage and wear.• Rotate the oil pump by hand, and check that it rotates ...

Other materials:

Inspection
CLUTCH SYSTEM > Clutch SwitchINSPECTION1. CLUTCH START SWITCH1. Perform the following inspections. If the clutch start switch does not operate normally, adjust the switch, and check it again. Clutch Switch > ADJUSTMENT">• Make sure that engine does not start with clutch pedal no ...

Assembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Extension CaseASSEMBLY1. Press-fit the dust cover into extension case.2. Install the extension case oil seal to extension case. Differential Side Retainer Oil Seal > REPLACEMENT">3. Install all plugs.NOTE:• Use a new O-ring or a gasket ...

Harness components location Location
WIRING SYSTEM > Harness Components LocationLOCATION(1)Front wiring harness(7)Rear wiring harness RH(12)Front door cord LH(2)Engine wiring harness(8)Rear wiring harness LH(13)Transmission cord(3)Bulkhead wiring harness(9)Roof cord(14)Generator cord(4)Instrument panel wiring harness(10)Rear gate co ...