LIGHTING SYSTEM > Headlight System
NOTE
For operation procedures of each component of the headlight system, refer to the respective section.
• Headlight Assembly: Headlight Assembly">
• Headlight bulb: Headlight Bulb">
• Combination switch (light): Combination Switch (Light)">
• Light control sensor: Light Control Sensor">
Wiring diagramInstallation
MECHANICAL(H4DO) > Cylinder HeadINSTALLATION1. CYLINDER HEAD RH1. Clean the bolt holes in the cylinder block RH.CAUTION:To avoid erroneous tightening of the bolts, clean out the bolt holes sufficiently by blowing with compressed air to eliminate engine coolant etc.2. Apply liquid gasket to both s ...
Installation
DRIVE SHAFT SYSTEM > Front AxleINSTALLATION1. Install the front drive shaft assembly.CAUTION:• Do not hammer the drive shaft assembly when installing.• Use new axle nuts.(1) Insert the drive shaft assembly into the hub spline, and pull it into the specified position.(2) Tighten the ax ...
Location
GLASS/WINDOWS/MIRRORS > Relay and FuseLOCATIONMain fuse boxRear defogger relay(A)Fuse 25 A (rear defogger)(B)Relay & fuse boxFuse 7.5 A (remote control mirror)(C)Fuse 15 A (wiper deicer)(D)Fuse 7.5 A (power window)(E)Relay holderPower window relay(F)Wiper deicer relay(G)NOTE:For other related ...