Subaru Crosstrek Owners Manual: Loading a disc
CAUTION
Never try to disassemble the audio kit or lubricate any part of the CD player. Do not insert anything other than a disc into the slot.
Insert a disc into the disc slot. After insertion, the disc is automatically loaded.
NOTE
When inserting a disc, gently insert it with the label facing up.
Unloading a disc
Press the eject button to remove the disc.
How to change the source
The CD operation screen can be reached by the following methods:
- Insert a disc. Refer to "Loading a disc"
- Select the "DISC" key on the source select screen. Refer to "Selecting an audio source"
Control screen and audio panel
Select to display the audio source
selection screen.
Select to display the play mode
currently selected. Refer to "Select
play mode"
Audio CD:
Select to display a track list.
MP ...
Select play mode
The play mode settings display will appear
when play mode key is touched. Select
the preferred play mode from the following
items.
Icon
Function
Touch to start 1 track repea ...
Other materials:
When checking or servicing in the engine compartment
CAUTION
Do not contact the drive belt
cover while checking the components
in the engine compartment.
Doing so may cause your
hand to slip off the cover and
result in an unexpected injury.
Do not touch the oil filter until the engine has cooled down
completely.
Doing so m ...
Installation
PARKING BRAKE > Parking Brake Assembly (Rear Disc Brake)INSTALLATIONCAUTION:Be sure the lining surface is free from brake fluid and grease.1. Apply brake grease to the following locations.Preparation items:Brake grease: Dow Corning Molykote 44MA or equivalent• Six contact surfaces of the pa ...
Installation
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > Leak Check Valve AssemblyINSTALLATION1. Install the leak check valve assembly to the vehicle with the bolt and clip (A).Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Connect the connector to the leak check valve assembly.3. Conn ...
