Subaru Crosstrek Service Manual: Keyless access system

Installation

SECURITY AND LOCKS > Keyless Access Outdoor AntennaINSTALLATIONInstall each part in the reverse order of removal.Tightening torque:Rear antenna assembly - exterior: 1.5 N·m (0.2 kgf-m, 1.1 f ...

Electrical specification

SECURITY AND LOCKS > Keyless Access SystemELECTRICAL SPECIFICATIONRefer to “Control Module I/O Signal” of “KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS)” sectio ...

Other materials:

Installation
STARTING/CHARGING SYSTEMS(H4DO) > BatteryINSTALLATIONCAUTION:After the battery is installed, initial diagnosis of the electronic throttle control is performed. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.1. Install the battery.2. Set the battery ...

Reverse Automatic Braking (RAB) system overview
The Subaru Ascent RAB system operates using four rear-mounted sonar sensors and provides two primary functions designed to assist the driver during reversing maneuvers. Sonar Audible Alarm function This function continuously monitors the rear area of the Subaru Ascent and alerts the drive ...

Assembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Front Differential AssemblyASSEMBLY1. DIFFERENTIAL CASE ASSEMBLY1. Install the washer and differential bevel gear into the differential case (RH).2. Install the differential bevel pinions into differential case (RH) and install the pinion shaft.(A)Pinio ...