Subaru Crosstrek Service Manual: Installation
COOLING(H4DO) > Reservoir Tank
INSTALLATION
Install in the reverse order of removal.
Removal
COOLING(H4DO) > Reservoir TankREMOVAL1. Disconnect the over flow hose (A) connected to the radiator filler neck from the reservoir tank.2. Pull out the reservoir tank to the arrow direction while p ...
Thermostat
...
Other materials:
Removal
LIGHTING SYSTEM > Rear Height SensorREMOVALCAUTION:Always remove the sensor assembly - headlight beam leveler before removing any parts related to the suspension.1. Disconnect the ground cable from battery. NOTE">2. Lift up the vehicle, and remove the left rear wheel.3. Remove the sensor ...
Installation
MECHANICAL(H4DO) > Timing Chain AssemblyINSTALLATION1. TIMING CHAIN LHNOTE:• Be careful that the foreign matter is not into or onto the assembled component during installation.• Apply engine oil to all component parts of the timing chain.1. Prepare to attach the chain tensioner LH.(1) ...
Tripped sensor identification
The security indicator light flashes when
the alarm system has been triggered.
Also, the number of flashes indicates the
location of unauthorized intrusion or the
severity of impact on the vehicle.
When the ignition switch is turned to the
"ON" position, the indicator light will light
for ...
