Subaru Crosstrek Service Manual: Removal
COOLING(H4DO) > Reservoir Tank
REMOVAL
1. Disconnect the over flow hose (A) connected to the radiator filler neck from the reservoir tank.
2. Pull out the reservoir tank to the arrow direction while pushing the claw (B).
Inspection
COOLING(H4DO) > Reservoir TankINSPECTION1. Check that the reservoir tank does not have deformation, cracks or damage.2. Make sure the over flow hoses are not cracked, damaged or loose.3. Make sure ...
Installation
COOLING(H4DO) > Reservoir TankINSTALLATIONInstall in the reverse order of removal. ...
Other materials:
Inspection
SECURITY AND LOCKS > Front Door Latch and Door Lock Actuator AssemblyINSPECTION1. LATCHCheck if the latch operates normally.If the cable or rod is faulty, replace the latch & actuator assembly - front.2. LOCK ACTUATORPreparation tool:Circuit tester1. Check door lock operationCheck the door lo ...
Inspection
POWER ASSISTED SYSTEM (POWER STEERING) > Steering WheelINSPECTION1. PADDLE SHIFT SWITCHCheck the resistance of paddle switch.STEPCHECKYESNO1.SHIFT-UP SWITCH CONTINUITY CHECK.1) Operate the + side of paddle shift assembly and hold it.2) Measure the resistance between terminals of the paddle shift ...
Installation
EXTERIOR/INTERIOR TRIM > Front BumperINSTALLATION1. Install each part in the reverse order of removal.2. Secure the flange section of the bumper face - front to the bracket - front bumper side.CAUTION:• Install so that the front end of the under cover (b) comes inside the bumper face - fron ...
