Subaru Crosstrek Service Manual: Installation
COOLING(H4DO) > Radiator Main Fan and Fan Motor
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Confirm that the radiator hose is securely connected.
NOTE:
If the installation of the radiator main fan and fan motor is difficult, attempt installation after loosening the bolts which hold the radiator sub fan shroud to the radiator.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
Inspection
COOLING(H4DO) > Radiator Main Fan and Fan MotorINSPECTIONCheck that the radiator main fan, radiator main fan shroud and main fan motor assembly do not have deformation, cracks or damage. ...
Other materials:
Installation
EXTERIOR/INTERIOR TRIM > Side GarnishINSTALLATIONCAUTION:Do not reuse the garnish assembly. Deformation occurs on the garnish assembly when once removed, and this may cause improper adhesion.1. Install each part in the reverse order of removal.2. Install the garnish assembly - fender and the garn ...
Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Electronic Throttle Control RelayREMOVAL1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work.2. Release the lock and remove the fuse holder from the relay & fuse box.3. Disconnect the connectors from the relay ...
Bulkhead wiring harness (in engine compartment) Location
WIRING SYSTEM > Bulkhead Wiring Harness (In Engine Compartment)LOCATIONConnectorConnecting toNo.PoleColorAreaNo.DescriptionB35BlackB-2 Mass air flow and intake air temperature sensorB62Light grayC-3 Front ABS wheel speed sensor RHB85Light grayB-5 Front wiper motorB104Light grayC-4 Pressure switch ...
