Subaru Crosstrek Service Manual: Inspection mode Procedure
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Inspection Mode
PROCEDURE
Recreate the circumstance by referring to the conditions described in the checklist.
Electrical component location Location
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Electrical Component LocationLOCATION(1)Occupant detection control module(3)Airbag ON/OFF indicator light(4)Buckle switch (passenger’s seat)(2)Occupa ...
List of diagnostic trouble code (dtc) List
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > List of Diagnostic Trouble Code (DTC)LISTDTCItemContent of diagnosisReferenceB1650OCCUPANT DETECTION SYSTEM MALFUNCTION• Occupant detection sensor is ...
Other materials:
Ignition switch (models without "keyless access with push-button start
system")
WARNING
Never turn the ignition switch to
the "LOCK" position while the
vehicle is being driven or towed
because that will lock the steering
wheel, preventing steering
control. And when the engine is
turned off, it takes a much greater
effort than usual to steer.
Before leaving t ...
Dtc p0801 reverse inhibit control circuit/open
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0801 REVERSE INHIBIT CONTROL CIRCUIT/OPENDTC DETECTING CONDITION:Immediately at fault recognitionNOTE:For diagnostic procedures, refer to “BODY CONTROL SYSTEM (DIAGNOSTICS)”. ...
Removal
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > Leak Check Valve AssemblyREMOVAL1. Disconnect the ground cable from battery.2. Lift up the vehicle.3. Remove the rear exhaust pipe. Rear Exhaust Pipe > REMOVAL">4. Remove the propeller shaft. Propeller Shaft > REMOVAL"& ...
