OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > List of Diagnostic Trouble Code (DTC)
LIST
DTC | Item | Content of diagnosis | Reference |
B1650 | OCCUPANT DETECTION SYSTEM MALFUNCTION |
• Occupant detection sensor is faulty.
• Occupant detection control module is faulty.
• Occupant detection harness is faulty.
• Fuse No. 25 is blown.
• Rear airbag harness is faulty.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1650 OCCUPANT DETECTION SYSTEM MALFUNCTION">
B1655
FRONT BUCKLE SWITCH RH FAILURE
• Passenger’s buckle switch circuit is open, shorted or shorted to ground.
• Occupant detection system is faulty.
• Occupant detection harness is faulty.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1655 FRONT BUCKLE SWITCH RH FAILURE">
B1760
OCCUPANT DETECTION SENSOR MAT
• Occupant detection sensor is faulty.
• Occupant detection sensor is open, shorted between terminals, shorted to power supply or shorted to ground.
• Seat heater is open.
• Occupant detection control module is faulty.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1760 OCCUPANT DETECTION SENSOR MAT">
B1761
OCCUPANT DETECTION SENSOR MAT LIQUID COATING
• Detected that the occupant detection sensor is spattered with fluid.
• Occupant detection sensor is faulty.
• Occupant detection control module is faulty.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1761 OCCUPANT DETECTION SENSOR MAT LIQUID COATING">
B1771
BUCKLE SWITCH
• Passenger’s buckle switch is faulty.
• Passenger’s buckle switch circuit is open, shorted or shorted to ground.
• Occupant detection system is faulty.
• Occupant detection harness is faulty.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1771 BUCKLE SWITCH">
B1795
OCCUPANT DETECTION MODULE INTERNAL CIRCUIT
Occupant detection control module is faulty.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1795 OCCUPANT DETECTION MODULE INTERNAL CIRCUIT">
Inspection mode Procedure
Passenger s airbag on/off indicator light illumination pattern InspectionRemoval
WIPER AND WASHER SYSTEMS > Rear WasherREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the trim panel - rear gate UPR.(1) Remove the claws on the trim edge.(2) Release the claws in the center of trim, and remove the trim panel - rear gate UPR.3. Remove the roof spoiler ...
Preparation for image quality and volume settings
1. Turn the ignition switch to the "ON"
position.
2. Push and hold the button to show
the selection screen.
3. After the selection screen is displayed,
operate the "
" or "
" switch to show the
"Display" item. Then, push the
button. ...
Dtc b2223 gerda malfunction
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2223 GERDA MALFUNCTIONDTC DETECTING CONDITION:When the system microcomputer can not send/receive the data with the image microcomputer normally.TROUBLE SYMPTOM:There is no display on the TFT. O ...