SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF) > Sunroof Motor
INSPECTION
Check the auto-reverse mechanism.
CAUTION:
Do not place objects in the way to check the auto-reverse mechanism.
1. Open the lid assembly - sunroof.
2. Push the lid assembly - sunroof in the opening direction with a force of 110±10 N (11.2 kgf, 24.7 lbf±1.0 kgf, 2.2 lbf) during the auto-closing operation, and check whether the window auto-reverse mechanism functions.
NOTE:
If the auto function is cancelled, perform the initialize operation. Sunroof Control System > OPERATION">
Sunroof motor
RemovalOther markings
The following makings are also
placed on the sidewall.
Maximum permissible inflation
pressure
The maximum cold inflation pressure
to which this tire may be
inflated. For example, "300 kPa
(44 PSI) MAX. PRESS"
Maximum load rating
The load rating at the maximum
permissible weight load for th ...
Inspection
VEHICLE DYNAMICS CONTROL (VDC) > Rear ABS Wheel Speed SensorINSPECTION1. CHECK WITH SUBARU SELECT MONITOR1. Connect the Subaru Select Monitor.NOTE:For detailed operation procedures, refer to “Application help”.(1) On «Start» display, select «Diagnosis».(2) On «Vehicle selection» ...
Removal
FRONT SUSPENSION > Front Ball JointREMOVAL1. Lift up the vehicle, and then remove the front wheels.2. Remove the under cover - front. Front Under Cover > REMOVAL">3. Remove the clamp - stabilizer bushing on the left and right sides.4. Remove the ball joint assembly.(1) Pull out the co ...