Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Engine wiring harness

Installation
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Engine Oil Temperature SensorINSTALLATIONInstall in the reverse order of removal.NOTE:Use a new gasket.Tightening torque:18 N·m (1.8 kgf-m, 13.3 ft-lb) ...

Inspection
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Engine Wiring HarnessINSPECTIONCheck that the engine wiring harness does not have deformation, cracks and any other damage. ...

Other materials:

Dtc p0451 evap system (cpc) pressure sensor/switch circuit range/performance
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0451 EVAP SYSTEM (CPC) PRESSURE SENSOR/SWITCH CIRCUIT RANGE/PERFORMANCEDTC detecting condition:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, ...

Intake manifold vacuum Inspection
MECHANICAL(H4DO) > Intake Manifold VacuumINSPECTION1. Turn the ignition switch to OFF.2. Warm up the engine.3. Install the vacuum gauge.(1) Remove the brake booster vacuum hose from the intake manifold.(2) Connect the vacuum gauge to the intake manifold.4. Keep the engine at idle speed and read t ...

Component
CLUTCH SYSTEM > General DescriptionCOMPONENT1. CLUTCH ASSEMBLY(1)Dust cover(6)Release bearingTightening torque: N·m (kgf-m, ft-lb)(2)Lever spring(7)Clutch coverT1:16 (1.6, 11.8)(3)Pivot(8)Clutch discT2: Flywheel > INSTALLATION">(4)Release lever(9)Flexible flywheel (5)Clip(10)Pi ...

© 2016-2026 Copyright www.sucross.com