Subaru Crosstrek Service Manual: Engine mounting

Installation

MECHANICAL(H4DO) > Engine AssemblyINSTALLATION1. Install the engine mounting onto the engine.Tightening torque:35 N·m (3.6 kgf-m, 25.8 ft-lb)2. Apply a small amount of grease to splines of m ...

Inspection

MECHANICAL(H4DO) > Engine MountingINSPECTIONMake sure that there are no cracks or other damages. ...

Other materials:

Starting and stopping the engine (models without push-button start system)
CAUTION When operating the Subaru Ascent starter motor, never crank the engine continuously for more than 10 seconds. If the engine of the Subaru Ascent does not start within 5 to 10 seconds, stop cranking and wait at least 10 seconds before attempting again. This pause helps prevent overh ...

Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > In-Vehicle Sensor (Auto A/C Model)REMOVALCAUTION:Be careful not to damage the sensors and interior trims when removing.1. Disconnect the battery ground cable and wait for at least 60 seconds before starting work. NOTE">2. Remove the cover assemb ...

Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Evaporator SensorREMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">1. Using the refrigerant recovery ...