Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Dtc u0423 invalid data received from instrument panel cluster control module

Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)

DTC U0423 INVALID DATA RECEIVED FROM INSTRUMENT PANEL CLUSTER CONTROL MODULE

Received error data from combination meter.

NOTE:

Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE">

Dtc u0422 invalid data received from body control module
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0422 INVALID DATA RECEIVED FROM BODY CONTROL MODULEReceived error data from ...

General description
...

Other materials:

Installation
EXHAUST(H4DO) > Rear Exhaust PipeINSTALLATION1. Apply a coat of spray type lubricant to the mating area of cushion rubber.2. Install the rear exhaust pipe to cushion rubber.NOTE:After assembling, degrease the lubricant which was applied to the cushion rubber while removing/installing.3. Install t ...

Installation
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Switches and HarnessINSTALLATION1. BACK-UP LIGHT AND NEUTRAL POSITION SWITCH1. Install the back-up light switch & neutral position switch with the harness.NOTE:Use a new gasket.Tightening torque:32.3 N·m (3.3 kgf-m, 23.8 ft-lb)(A)Neutral posi ...

Reset to factory default settings
1. Perform the preparation steps according to "Preparation for initialization" 2. Operate the " " or "  " switch to select the "Reset to Defaults" item. Then push the  button. 3. The system will prompt a Yes/No dialogue ("No" is selected first). To return to the factory d ...

© 2016-2025 Copyright www.sucross.com