POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC C2531 CONTROL MODULE CPU
TROUBLE SYMPTOM:
• The steering wheel operation feels heavy.
• STEERING warning light illuminates.
NOTE:
When this code is displayed, replace the power steering control module with new parts. Power Steering Control Module">
Dtc c2522 resolver sensor
Dtc c2532 control module peripheral circuitRemoval
LIGHTING SYSTEM > Spot Map LightREMOVAL1. MODELS WITHOUT EyeSight1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - map.CAUTION:When using a flat tip screwdriver, use an appropriate sized tool for the insertion opening, apply protective tape or cloth around ...
Installation
BRAKE > Brake BoosterINSTALLATION1. Check and adjust the operating rod of the vacuum booster assembly.(1) Measure the length between the vacuum booster assembly mounting surface and clevis pin hole.(2) If it is not within the specification, loosen the lock nut, rotate the vacuum booster assembly ...
Dtc b2779 remote control engine starter collation
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2779 REMOTE CONTROL ENGINE STARTER COLLATIONDTC detecting condition:When the keyless access CM does not respond to engine start even when the remote control engine starter is O ...