Subaru Crosstrek Service Manual: Disassembly
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Center Differential
DISASSEMBLY
Remove the ball bearing using ST.
NOTE:
Center differential is a non-disassembled part which should not be disassembled.
| ST 498077300 | CENTER DIFFERENTIAL BEARING REMOVER |
Removal
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Center DifferentialREMOVAL1. Remove the manual transmission assembly from the vehicle. Manual Transmission Assembly > REMOVAL">2. Remove the ...
Inspection
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Center DifferentialINSPECTION1. Ball bearingReplace the bearings in the following cases.• In case of broken or rusty bearings• In case of wor ...
Other materials:
Inspection
COOLING(H4DO) > Radiator Fan SystemINSPECTIONOperating condition:Vehicle speedA/C compressor loadEngine coolant temperatureIncrease: 98°C (208°F) or lessDecrease: 96°C (205°F) or lessIncrease: 99 — 101°C (210 — 214°F)Decrease: ...
Selecting a station from the list (if equipped)
A station list can be displayed.
1. Touch the tab.
2. Touch the tab and the station
list will
appear.
3. Select the desired station.
Update the station list
Touch the "Update Station List" key on the
station list screen and the following screen
will be displayed.
...
Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Expansion ValveREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Using the refrigerant recovery system, discharge refrigerant. Refrigerant Recovery Procedure > PROCEDURE">3. Remove the air intake boot. Air Intake Boot > ...
