Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Diagnostic procedure with diagnostic trouble code (dtc)

Subaru Crosstrek Service Manual / Auto headlight beam leveler system (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc)

Wiring diagram
AUTO HEADLIGHT BEAM LEVELER SYSTEM (DIAGNOSTICS) > Control Module I/O SignalWIRING DIAGRAMRefer to “Headlight Beam Leveler System” in the wiring diagram. Headlight Beam Leveler System ...

Dtc u0122 lost communication with vehicle dynamics control module
AUTO HEADLIGHT BEAM LEVELER SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0122 LOST COMMUNICATION WITH VEHICLE DYNAMICS CONTROL MODULEDetected when CAN data (ve ...

Other materials:

Inspection
LIGHTING SYSTEM > Turn Signal Light & Hazard Light UnitINSPECTION1. Disconnect the connector of the turn signal & hazard unit.2. Measure the voltage between the turn signal & hazard unit connector and the chassis ground.Preparation tool:Circuit testerTerminal No.Inspection conditionsS ...

Initial illumination for system check
Several of the warning and indicator lights illuminate when the ignition switch is initially turned to the "ON" position. This permits checking the operation of the bulbs. Apply the parking brake and turn the ignition switch to the "ON" position. For the system check, the following lights ...

Id code box Note
SECURITY AND LOCKS > ID Code BoxNOTENOTE:• Equipped on C5 model with keyless access with push button start.• The ID code box is located at the place of security control module.Refer to “Security Control Module” for operation procedures on ID code box. Security Control Mod ...

© 2016-2024 Copyright www.sucross.com