Subaru Crosstrek Service Manual: Component
EyeSight > General Description
COMPONENT
1. STEREO CAMERA
(1) | Shim (washer) | (4) | Stereo camera cover ASSY | Tightening torque: N·m (kgf-m, ft-lb) | |
(2) | Camera plate | (5) | Cap | T: | 5.5±1.0 (0.56±0.10, 4.1±0.7) |
(3) | Stereo camera | ||||
Preparation tool
EyeSight > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS87599VA000RANDOM CHARTUsed for adjusting stereo camera. — SUBARU SELECT MONITOR 4Used for set ...
Location
EyeSight > General DescriptionLOCATIONRefer to “LOCATION” of “EyeSight (DIAGNOSTICS)” section. Electrical Component Location > LOCATION"> ...
Other materials:
System features
BSD/RCTA consists of the following functions.
To detect a vehicle in a blind spot on an
adjacent lane or a vehicle approaching at
high speed while driving the vehicle (Blind
Spot Detection)
To detect a vehicle approaching from
the right or left while reversing the vehicle
(Rear Cross ...
Dtc u0122 lost communication with vehicle dynamics control module
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0122 LOST COMMUNICATION WITH VEHICLE DYNAMICS CONTROL MODULEDetected when CAN data from VDC is not transmitted to stereo camera.When lost communication with vehicle dynamics control and vehicle dynamics control m ...
Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Inhibitor SwitchINSTALLATION1. Install the inhibitor switch to the transmission case temporarily.2. Connect the inhibitor harness connector to the inhibitor switch.3. Install the shifter arm and fix with the spring pin.NOTE:Use new spring pin.(A)Spring ...
