Subaru Crosstrek Service Manual: Clutch system Inspection and adjustment
PERIODIC MAINTENANCE SERVICES > Clutch System
INSPECTION AND ADJUSTMENT
Refer to “CL” section for inspection and adjustment of clutch system. Clutch Pedal > INSPECTION">
Clutch Pedal > ADJUSTMENT">
Brake line Inspection
PERIODIC MAINTENANCE SERVICES > Brake LineINSPECTION1. BRAKE LINE1. Check for scratches, swelling, corrosion, traces of fluid leakage on the brake hoses or pipe joints.2. Make sure that brake pipes ...
Cooling system Inspection
PERIODIC MAINTENANCE SERVICES > Cooling SystemINSPECTION1. RADIATORCheck that there are no engine coolant leaks from the hose connections. Refer to “CO” section for radiator inspection. ...
Other materials:
Dtc u0122 lost communication with vehicle dynamics control module
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0122 LOST COMMUNICATION WITH VEHICLE DYNAMICS CONTROL MODULENOTE:For the diagnostic procedure, refer to LAN section. Basic Diagnostic Procedure">1. OUTLINE OF DIAGNOSISDetect malfunction of CAN commu ...
Removal
SECURITY AND LOCKS > Keyless BuzzerREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Lift up the vehicle.3. Remove the clips and screws, and turn over the front side of the mud guard - front RH.4. Remove the keyless buzzer.(1) Disconnect the connector.(2) Remove the clip and d ...
System operation
Operating conditions
The BSD/RCTA will operate when all of
the following conditions are met.
The ignition switch is in the "ON"
position.
The BSD/RCTA warning indicator and
BSD/RCTA OFF indicator are turned off.
The vehicle is driven at speeds above
6 mph (10 km/h) (except when rever ...
