Subaru Crosstrek Service Manual: Check list for interview Check
BODY CONTROL SYSTEM (DIAGNOSTICS) > Check List for Interview
CHECK
Inspect the following items regarding the vehicle’s state.
Body Control System Check List for Interview Date of Vehicle Bring-in Year Month Day | ||||
Customer’s name | Registration No. | Initial year of registration Year Month Date | ||
Vehicle model | Frame number | |||
Interviewer | Inspector | Engine type | Odometer reading | |
Customer specified content | ||||
Date and time when the trouble occurred | Frequency of trouble occurrence | |||
Condition of trouble occurrence | Weather | |||
Road conditions | Occurrence location | |||
Accessory installation condition | ||||
Trouble condition | ||||
|
| |||
Diagnostic code
Basic diagnostic procedure Procedure
BODY CONTROL SYSTEM (DIAGNOSTICS) > Basic Diagnostic ProcedurePROCEDURECAUTION:• Subaru Select Monitor is required for reading DTC, performing diagnosis and reading current data.• Remov ...
Clear memory mode Operation
BODY CONTROL SYSTEM (DIAGNOSTICS) > Clear Memory ModeOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Co ...
Other materials:
All-Wheel Drive warning light (CVT models)
This
light blinks if the vehicle is driven with
tires of differing diameters fitted on the
wheels or with an excessively low air
pressure in any of the tires.
WARNING
If the AWD warning light flashes,
promptly park in a safe location then
check whether all four tires are the
same diamete ...
Manual transmission
The manual transmission is a fully synchromeshed,
5-forward-speed and 1-reverse-
speed transmission.
The shift pattern is shown on the shift
lever knob. When shifting from 5th gear to
reverse gear, first return the shift lever to
the neutral position then shift into reverse
gear.
To ...
Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Blower MotorREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Release the clips, and remove the under cover assembly - passenger.3. Remove the blower - motor.(1) Disconnect the connector.(2) Remove the screws and detach the blower - m ...
