Subaru Crosstrek Service Manual: Wiring diagram
INSTRUMENTATION/DRIVER INFO > Combination Meter System
WIRING DIAGRAM
Refer to “Combination Meter System” in the wiring diagram.
– Models with normal meters: Combination Meter System > WIRING DIAGRAM">
– Model with color TFT meter: Combination Meter System > WIRING DIAGRAM">
Electrical specification
INSTRUMENTATION/DRIVER INFO > Combination Meter SystemELECTRICAL SPECIFICATION1. COMBINATION METER ASSEMBLYRefer to “Control Module I/O Signal” of “INSTRUMENTATION/DRIVER INFO (DI ...
Inspection
INSTRUMENTATION/DRIVER INFO > Combination Meter SystemINSPECTIONRefer to “Basic Diagnostic Procedure” of “INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS)” section. Basic Diagnost ...
Other materials:
Installation
FRONT SUSPENSION > Front StrutINSTALLATION1. Install the strut mount - front at the upper side of the strut to the body, and tighten it with new flange nuts.Tightening torque:20 N·m (2.04 kgf-m, 14.8 ft-lb)2. Align alignment marks on the camber adjusting bolt and strut.Using new self-locki ...
Assembly
SEATS > Rear SeatASSEMBLYCAUTION:• Do not reuse hog rings.• Secure the hog ring using hog ring pliers.• Install the hog rings to the specified points securely and make sure that there is no wrinkle or twisting on the cover COMPL - rear backrest.1. Assemble the cover COMPL - rear ...
Installation
BRAKE > Stop Light SwitchINSTALLATION1. BULB TYPE1. Install the stop light switch.CAUTION:• Turn the stop light switch clockwise when installing so that it can return backward by approximately 1 mm (0.04 in) and clearance is automatically adjusted.• If it is hard to turn the switch, r ...
