Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Wheel alignment

Preparation tool
FRONT SUSPENSION > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS927680000INSTALLER & REMOVER SETUsed for replacing the bushing front - front arm of ...

Adjustment
FRONT SUSPENSION > Wheel AlignmentADJUSTMENTCAUTION:When the wheel alignment has been adjusted, perform the adjustment of the VDC. VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) > ...

Other materials:

Disassembly
COOLING(H4DO) > Radiator Main Fan and Fan MotorDISASSEMBLY1. Remove the clip which holds the main fan motor connector onto the radiator main fan shroud.2. Disconnect the radiator main fan from the main fan motor.3. Disconnect the main fan motor from the radiator main fan shroud. ...

Installation
MECHANICAL(H4DO) > Engine AssemblyINSTALLATION1. Install the engine mounting onto the engine.Tightening torque:35 N·m (3.6 kgf-m, 25.8 ft-lb)2. Apply a small amount of grease to splines of main shaft. (MT model)Grease:NICHIMOLY N-130 or equivalent3. Position the engine in engine compartmen ...

Select lever
Select lever positions Select lever button With the brake pedal depressed, shift while pressing the select lever button in. Shift while pressing the select lever button in. Shift without pressing the select lever button. The select lever has four positions, "P", "R", "N", ...

© 2016-2026 Copyright www.sucross.com