Subaru Crosstrek Service Manual: Water pipe assembly

Installation

COOLING(H4DO) > ThermostatINSTALLATION1. ENGINE SIDE1. Install a gasket to thermostat.NOTE:Use a new gasket.2. Install the thermostat and thermostat cover.Tightening torque:6.4 N·m (0.7 kgf- ...

Inspection

COOLING(H4DO) > Water Pipe AssemblyINSPECTION1. Check that the water pipe assembly has no deformation, cracks or other damages.2. Check that the hose has no cracks, damage or loose part. ...

Other materials:

Light control switch
CAUTION Use of any lights for a long period of time while the engine is not running can cause the battery to discharge. Before leaving the vehicle, make sure that the lights are turned off. If the vehicle is left unattended for a long time with the lights illuminated, the batte ...

General description
Caution Blind Spot Detection/Rear Cross Traffic Alert > General DescriptionCAUTION• Before disconnecting connectors of sensors or units, be sure to disconnect the ground cable from battery. When replacing the electrical parts provided with memory functions that store contents specified by ...

Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve ActuatorREMOVAL1. Disconnect the ground cable from battery.2. Disconnect the connector (A) from tumble generator valve assembly, and remove the tumble generator valve actuator.• RH side• LH side ...