Subaru Crosstrek Service Manual: Torque converter assembly

Installation

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Secondary Speed SensorINSTALLATIONCAUTION:• Be sure to prevent water or oil from contacting the connector terminal of secondary speed sensor. If ad ...

Inspection

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Torque Converter AssemblyINSPECTION• Check the protrusion of torque converter center (front boss) is not deformed or damaged.• Check the ring ...

Other materials:

Removal
WIPER AND WASHER SYSTEMS > Rear Wiper MotorREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the trim panel - rear gate. Rear Gate Trim > REMOVAL">3. Remove the arm assembly - rear wiper.(1) Remove the cover - rear wiper arm.(2) Remove the nut, and remove th ...

Rear view camera
In the Subaru Ascent, the rear view camera is mounted on the rear gate and is designed to assist the driver during reversing maneuvers. When the ignition is switched to the "ON" position and the select lever is moved into "R", the system automatically activates and disp ...

Installation
CLUTCH SYSTEM > Master CylinderINSTALLATION1. Install the master cylinder to the body, and connect the clutch pipe and the tank hose.Tightening torque:T1: 15 N·m (1.5 kgf-m, 11.1 ft-lb)T2: 18 N·m (1.8 kgf-m, 13.3 ft-lb)2. Connect the push rod of the master cylinder, and install the ...