Inspection
InspectionInspection
CLUTCH SYSTEM > Clutch Disc and CoverINSPECTION1. CLUTCH DISC1. Facing wearMeasure the depth from the facing surface to the rivet head. Replace if the face is worn locally or worn down to less than the specified value.Depth to rivet head:Limit of sinking0.8 mm (0.031 in)NOTE:Do not wash the clutc ...
General description
DIFFERENTIALS > Rear Differential Inspection ModeGENERAL DESCRIPTIONCAUTION:Be sure to perform rear differential inspection mode.• Follow the messages displayed on the Subaru Select Monitor when working.• “Rear differential inspection mode” using the Subaru Select Monitor ...
Control module i/o signal Electrical specification
BODY CONTROL SYSTEM (DIAGNOSTICS) > Control Module I/O SignalELECTRICAL SPECIFICATIONDescriptionTerminal No.Signal (V or ?)NoteIgnition switch ON(Engine OFF)Ignition power supply (rear wiper)A5 ←> Chassis groundLess than 1.5 V > 10 — 13 VIgnition switch OFF > ONBattery power suppl ...