Subaru Crosstrek Service Manual: Stop light system

Installation

LIGHTING SYSTEM > SRF OFF SwitchINSTALLATIONInstall each part in the reverse order of removal. ...

Inspection

LIGHTING SYSTEM > Stop Light SystemINSPECTION1. CHECK STOP LIGHT SWITCHRefer to “INSPECTION” of the “Stop Light Switch” in “BRAKE” section. Stop Light Switch &g ...

Other materials:

Removal
LIGHTING SYSTEM > Room LightREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - room.CAUTION:When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage.(1) Release the claws and remove the lens.(2) Remove the ...

To arm the system using access key/remote transmitter
1. Close all windows and the moonroof (if equipped). 2. Remove the key from the ignition switch (models without "keyless access with push-button start system")/turn the push-button ignition switch to the "OFF" position (models with "keyless access with push-button start system"). 3. Open ...

Dtc p015b a/f / o2 sensor delayed response - lean to rich bank 1 sensor 1
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P015B A/F / O2 SENSOR DELAYED RESPONSE - LEAN TO RICH BANK 1 SENSOR 1NOTE:For the diagnostic procedure, refer to DTC P014C. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P014C A/F / O2 SENS ...