Subaru Crosstrek Owners Manual: Steering responsive fog lights warning indicator/ Steering responsive fog lights OFF indicator (models with EyeSight system)
NOTE
For details about the steering responsive fog lights system, refer to "Steering responsive fog lights system (models with EyeSight system)"
Steering responsive fog lights warning indicator
This indicator appears when the steering responsive fog lights system malfunctions.
When this indicator appears while the system is activated, contact your SUBARU dealer for an inspection.
Steering responsive fog lights OFF indicator
This indicator appears when the steering responsive fog lights system is deactivated.
This indicator disappears when the system is activated.
BSD/RCTA warning indicator (if equipped)
This
warning indicator appears when the
BSD/RCTA is malfunctioning. In this case
the BSD/RCTA warning indicator will be
shown on the multi information display of
the combination meter. When this indicator
appears, have your vehicle inspected
by your SUBARU dealer as soon as
possible.
BSD/RCTA OFF indicator (if equipped)
The
indicator appears when the BSD/
RCTA OFF switch is pressed to deactivate
the BSD/RCTA. In this case the BSD/
RCTA OFF indicator will be shown on the
multi information display of the combination
meter. For details, refer to "BSD/
RCTA"
Headlight indicator light
This
indicator light illuminates under the
following conditions.
when the light switch is turned to the
"
" or "
" position
when the light control switch is in the
"AUTO" posit ...
Information display (if equipped)
NOTE
For models with color multi function
display, refer to "Multi function display"
Outside temperature indicator
Driving information display
Clock
With the ignition switch in the "A ...
Other materials:
List
EyeSight (DIAGNOSTICS) > EyeSight Temporary Code(s) DisplayLIST• List of EyeSight temporary stop codeEyeSight pause codeItemContents of diagnosisReferenceE5Stereo Camera Temporary StopThe operation stopped temporarily due to vertical deviation of the optical axis of the stereo camera. (Duri ...
Dtc c1562 reverse on fault
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1562 REVERSE ON FAULTDTC detecting condition:Abnormal reverse signalTrouble symptom:Hill start assist does not operate.Wiring diagram:Back-up light system Back-up Light System">CAN ...
Adjustment
SECURITY AND LOCKS > Impact SensorADJUSTMENT1. CHECK IMPACT SENSOR1. Pull out the key from the ignition switch, or turn the ignition switch to OFF.2. Close all the windows.3. Close all the doors and rear gate. Leave open the front hood.4. Press the LOCK button of the keyless transmitter or access ...
