The Subaru Ascent is equipped with advanced seatbelt pretensioner systems that significantly enhance occupant protection in the event of a collision. These systems are designed to instantly tighten the seatbelt, reducing slack and ensuring that passengers are securely restrained at the moment of impact.
The following seatbelts in the Subaru Ascent are equipped with pretensioners.
The Subaru Ascent pretensioners are activated by multiple safety sensors integrated into the vehicle.
These pretensioners are engineered to deploy during moderate to severe frontal or side collisions, as well as in rollover situations, ensuring максимальний рівень захисту для всіх пасажирів Subaru Ascent.
WARNING
Doing so may cause accidental deployment or system failure, which could lead to serious injury. The Subaru Ascent pretensioner system contains no user-serviceable parts and must only be serviced by an authorized SUBARU dealer.
NOTE
Seatbelt extender
Seatbelt with shoulder belt and lap belt pretensionersDtc c1252 wheel speed sensor signal of one of the wheels
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1252 WHEEL SPEED SENSOR SIGNAL OF ONE OF THE WHEELSDTC detecting condition:• Defective ABS wheel speed sensor signal (noise, irregular signal, etc.)• Defective magnetic encoder&b ...
Inspection
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Throttle BodyINSPECTION1. THROTTLE SENSOR (METHOD WITH CIRCUIT TESTER)1. Remove the glove box. Glove Box > REMOVAL">2. Turn the ignition switch to ON. (engine OFF)3. Measure the voltage between ECM connector terminals.(A)To ECM connector Thrott ...
Dtc b1830 short in curtain airbag rh squib circuit
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1830 SHORT IN CURTAIN AIRBAG RH SQUIB CIRCUITDiagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Curtain airbag harness (RH) circuit is shorted.• Curtain airbag module (RH) is faulty. ...