MECHANICAL(H4DO) > Camshaft
REMOVAL
1. CAMSHAFT RH
The camshaft RH and cam carrier are designed as removing as a unit. Refer to “Cam Carrier” for removal procedures of camshaft RH. Cam Carrier > REMOVAL">
Cam Carrier > DISASSEMBLY">
2. CAMSHAFT LH
The camshaft LH and cam carrier are designed as removing as a unit. Refer to “Cam Carrier” for removal procedures of camshaft LH. Cam Carrier > REMOVAL">
Cam Carrier > DISASSEMBLY">
Installation
Chain coverRemoval
INTAKE (INDUCTION)(H4DO) > Air Cleaner ElementREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the air intake duct. Air Intake Duct > REMOVAL">3. Disconnect the connector (A) from the mass air flow and intake air temperature sensor, and remove the clip (B). ...
Inspection
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Engine Oil Temperature SensorINSPECTION1. Check that the engine oil temperature sensor has no deformation, cracks or other damages.2. Immerse the engine oil temperature sensor and a thermometer in water.CAUTION:Take care not to allow water to get into the eng ...
Dtc c0071 no signal from steering angle sensor
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C0071 NO SIGNAL FROM STEERING ANGLE SENSORDTC detecting condition:Communication from steering angle sensor is faulty.Trouble symptom:• VDC does not operate.• EyeSight does not ope ...