Subaru Crosstrek Service Manual: Refrigerant pressure with manifold gauge set

Subaru Crosstrek Service Manual / Hvac system (heater, ventilator and a/c) / Refrigerant pressure with manifold gauge set

Removal

HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Power Transistor (Auto A/C Model)REMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the glove box. Glove Box > REMOVAL" ...

HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Refrigerant Pressure with Manifold Gauge SetINSPECTION1. INSPECTION WITH PRESSURE SYMPTOMSSymptomsReferenceBoth high and low pressure sides are low. Refri ...

Other materials:

Inspection
SECURITY AND LOCKS > Rear Gate Latch and Actuator AssemblyINSPECTION1. LATCHCheck if the latch operates normally.If latch deformation, abnormal wear, or unsmooth lock operation is observed, replace the latch and actuator - rear gate.2. ACTUATORPreparation tool:Circuit tester1. Check door lock ope ...

Electronic Brake Force Distribution (EBD) system
The Electronic Brake Force Distribution (EBD) system in the Subaru Ascent enhances braking efficiency by dynamically adjusting the distribution of braking force between the front and rear wheels. This optimization depends on factors such as vehicle load, speed, and driving conditions, ensuring ...

Disassembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transfer ClutchDISASSEMBLY1. Remove the snap ring, and then remove the pressure plate, drive plate and driven plate.(A)Snap ring2. Compress the return spring using the ST to remove the snap ring.ST 18762AA001COMPRESSOR SPECIAL TOOL(A)Snap ring(B)Tran ...