Subaru Crosstrek Service Manual: Rear side marker light bulb

Installation

LIGHTING SYSTEM > Rear Height SensorINSTALLATION1. Install each part in the reverse order of removal.Tightening torque:Sensor assembly - headlight beam leveler: 7.5 N·m (0.76 kgf-m, 5.5 ft-l ...

Inspection

LIGHTING SYSTEM > Rear Side Marker Light BulbINSPECTION1. Visually check the bulb for blow out.2. Check the bulb specification. General Description > SPECIFICATION">3. Replace the bulb ...

Other materials:

Front towing hook
1. Take the towing hook and screwdriver out of the tool bucket. Take the jack handle out of the cargo area. 2. Cover the tip of a flat-head screwdriver with vinyl tape or cloth so that it will not scratch the bumper. Insert the flat-head screwdriver into the cutout of the cover and pry op ...

X-MODE
WARNING When operating the Subaru Ascent with X-MODE engaged, always remain fully attentive. Overestimating the system’s capabilities can lead to hazardous situations and potentially serious accidents. Use extreme caution when relying on the hill descent control function in the Suba ...

Assembly
DRIVE SHAFT SYSTEM > Rear Drive ShaftASSEMBLYCAUTION:Wrap shaft splines with vinyl tape to protect the boot from scratches.NOTE:Use specified grease.Grease:BJ, EBJ side: NKG814DOJ side: NKG8141. Install the inner race to the shaft.(1) Install the boot (BJ) or boot (EBJ) in the specified position, ...