Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Read diagnostic trouble code (dtc) Operation

Subaru Crosstrek Service Manual / Hvac system (auto a/c) (diagnostics) / Read diagnostic trouble code (dtc) Operation

HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Read Diagnostic Trouble Code (DTC)

OPERATION

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System».

4. On «Select System» display, select «Air Conditioner» and select «Enter».

5. On «Select Function» display, select «DTC».

NOTE:

For detailed operation procedures, refer to “Application help”.

For details concerning DTC, refer to “List of Diagnostic Trouble Code (DTC)”. List of Diagnostic Trouble Code (DTC)">

List of diagnostic trouble code (dtc) List
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > List of Diagnostic Trouble Code (DTC)LISTDTCItemContent of diagnosisNoteB1430IN-VEHICLE (POST EVAPORATOR) TEMPERATURE SENSOR CIRCUIT OPENIn-vehicle air temper ...

Subaru select monitor Operation
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Subaru Select MonitorOPERATIONFor detailed operation procedures, refer to “Application help”.NOTE:When initialization communication using Select M ...

Other materials:

Installation
DRIVE SHAFT SYSTEM > Rear AxleINSTALLATION1. Temporarily tighten the rear axle housing to the upper arm assembly.2. Install the rear drive shaft assembly.CAUTION:• Do not hammer the drive shaft assembly when installing.• Use new axle nuts.(1) Insert the drive shaft assembly into the h ...

Preparing to drive
You should perform the following checks and adjustments every day before you start driving. 1. Check that all windows, mirrors, and lights are clean and unobstructed. 2. Check the appearance and condition of the tires. Also check tires for proper inflation. 3. Look under the vehicle fo ...

Dtc p2751 intermediate shaft speed sensor "c" circuit no signal
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P2751 INTERMEDIATE SHAFT SPEED SENSOR "C" CIRCUIT NO SIGNALDTC detecting condition:Immediately at fault recognitionTrouble symptom:• Shifting shock is felt.• Acceler ...

© 2016-2026 Copyright www.sucross.com