Subaru Crosstrek Owners Manual: Presetting a station
In total 18 stations can be set for the FM band (6 each for FM1, FM2 and FM3) and 12 stations can be set for the AM band (6 each for AM1 and AM2).
1. Tune in the desired station.
2. If you touch and hold a key, the system stores the frequency to the selected preset channel.
Control screen and audio panel
Select to display the audio source
selection screen.
Select to change the band.
The HD Radio indicator on the top
right of the screen changes according
to the reception condition of H ...
Selecting a station from the list (if equipped)
A station list can be displayed.
1. Touch the tab.
2. Touch the tab and the station
list will
appear.
3. Select the desired station.
Update the station list
Touch the "Update S ...
Other materials:
Removal
STARTING/CHARGING SYSTEMS(H4DO) > BatteryREMOVAL1. Disconnect the positive (+) terminal after disconnecting the negative (−) terminal of battery.2. Remove the battery cable holder from the battery rod.3. Remove the flange nut from battery rod and remove battery holder.4. Remove the battery. ...
Selection of manual mode
With the vehicle either moving or stationary,
move the select lever from the "D"
position to the "M" position to select the
manual mode.
Type A
Upshift indicator
Downshift indicator
Gear position indicator
Type B
Upshift indicator
Downshift indicator
Gear position indi ...
Basic diagnostic procedure Procedure
LAN SYSTEM (DIAGNOSTICS) > Basic Diagnostic ProcedurePROCEDURECAUTION:• Subaru Select Monitor is required for reading DTC, performing diagnosis, reading current data, customizing and active test (compulsory drive).• Remove foreign matter (dust, water, oil, etc.) from each control modu ...
