Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Preparation tool

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > General Description

PREPARATION TOOL

1. SPECIAL TOOL

ILLUSTRATION

TOOL NUMBER

DESCRIPTION

REMARKS

18471AA000

FUEL PIPE ADAPTER

Used for draining fuel.

SUBARU SELECT MONITOR 4

Used for setting of each function and troubleshooting for electrical system.

NOTE:

For detailed operation procedures of Subaru Select Monitor 4, refer to “Application help”.

2. GENERAL TOOL

TOOL NAME

REMARKS

Circuit tester

Used for measuring resistance, voltage and current.

Oscilloscope

Used for inspecting the waveform of each sensor.

Mighty Vac

Used for inspecting the manifold absolute pressure sensor.

DST-i

Used together with Subaru Select Monitor 4.

Component
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > General DescriptionCOMPONENT1. INTAKE MANIFOLD 1(1)Intake manifold protector(7)GasketTightening torque: N·m (kgf-m, ft-lb)(2)Cap(8)Tumble generator valv ...

Intake manifold
...

Other materials:

Assembly
FRONT SUSPENSION > Front StrutASSEMBLY1. Before assembly, check each part. Front Strut > INSPECTION">2. Using a coil spring compressor, compress the coil spring - front.CAUTION:When installing the coil spring compressor to the coil spring, follow the operation manual accompanied with ...

Light control switch
CAUTION Use of any lights for a long period of time while the engine is not running can cause the battery to discharge. Before leaving the vehicle, make sure that the lights are turned off. If the vehicle is left unattended for a long time with the lights illuminated, the batte ...

Assembly
CLUTCH SYSTEM > Operating CylinderASSEMBLYNOTE:During assembly, apply hydraulic oil to all parts.Recommended brake fluid:New FMVSS No. 116 DOT3 or DOT41. Install the piston spring.2. Insert piston into the operating cylinder.3. Install push rod to the boot.4. Install the boot and push rod. ...

© 2016-2024 Copyright www.sucross.com