Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Operation

TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Subaru Select Monitor

OPERATION

For detailed operation procedures, refer to “Application help”.

NOTE:

If TPMS & keyless entry CM or TPMS CM and Subaru Select Monitor cannot communicate, check the communication circuit. Subaru Select Monitor > INSPECTION">

Inspection
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Subaru Select MonitorINSPECTION1. COMMUNICATION FOR INITIALIZING IMPOSSIBLEDetecting condition:Defective harness connectorTrouble symptom:Communicati ...

Tire pressure warning light / trouble indicator light illumination pattern
...

Other materials:

Dtc b2271 ign relay control circuit
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2271 IGN RELAY CONTROL CIRCUITDTC detecting condition:• When malfunction is detected in IG1 and IG2 drive circuits in the keyless access CM.• When malfunction is de ...

Electrical component location Location
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Electrical Component LocationLOCATION(1)Steering gearbox(3)STEERING warning light(5)VDCCM&H/U(2)Power steering control module(4)Engine control module (ECM)(6)Data link connector (for Subaru Select Monitor)• U5 and U6 models• C ...

Electronic parking brake indicator light
Parking brake indicator In the Subaru Ascent, the electronic parking brake indicator light illuminates whenever the parking brake is applied while the ignition switch is in the "ON" position. This confirms that the vehicle is securely held in place. Once the parking brake is fully r ...

© 2016-2026 Copyright www.sucross.com