Subaru Crosstrek Service Manual: Operation
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Read Current Data
OPERATION
1. On «Start» display, select «Diagnosis».
2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
3. On «Main Menu» display, select «Each System».
4. On «Select System» display, select «Tire Pressure Monitor» and then select «Enter».
5. On «Select Function» display, select «Data Monitor».
NOTE:
For detailed operation procedures, refer to “Application help”.
List
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Read Current DataLISTDisplayContents to be displayedUnit of measureTire 1 FN codeLEARN, LOW BAT, OFF, WAKE, RE ME, NORMALLEARN: Transmitted transmitt ...
Other materials:
Dtc b1628 side airbag sensor lh initialization error
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1628 SIDE AIRBAG SENSOR LH INITIALIZATION ERRORDiagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Open or short circuit in harness of side sensor bus (LH)• Side airbag sensor (LH) an ...
Adjustment
VEHICLE DYNAMICS CONTROL (VDC) > VDC Control Module and Hydraulic Control Unit (VDCCM&H/U)ADJUSTMENT1. VDC SENSOR MIDPOINT SETTING MODE (MODELS WITHOUT EyeSight)After installing, replacing or adjusting the following parts, perform the VDC sensor midpoint setting mode.• Steering angle se ...
Clock
In the Subaru Ascent, vehicles equipped with a genuine SUBARU navigation and/or
audio system allow the clock to be configured either automatically or manually,
depending on driver preference and system capabilities.
Setting the clock manually
1. Turn the ignition switch to the "ON" p ...
