Subaru Crosstrek Owners Manual: Maximum load limits
WARNING
Never exceed the maximum load limits explained in the following.
Exceeding the maximum load limits could cause personal injury and/or vehicle damage.
CAUTION
- Adequate size trailer brakes are required when the trailer and its cargo exceed 1,000 lbs (453 kg) total weight.
- Before towing a trailer, check the trailer total weight, GVW, GAWs and tongue load. Make sure the load and its distribution in your vehicle and trailer are acceptable.
- Total trailer weight
- Gross Vehicle Weight (GVW) and Gross Vehicle Weight Rating (GVWR)
- Gross Axle Weight (GAW) and Gross Axle Weight Rating (GAWR)
- Tongue load
Warranties and maintenance
SUBARU warranties do not apply to
vehicle damage or malfunction caused
by trailer towing. If you use your vehicle to
tow a trailer, more frequent maintenance
will be required due to the additional ...
Total trailer weight
Total trailer weight
The total trailer weight (trailer weight plus
its cargo load) must never exceed the
maximum total trailer weight in the following
table.
Conditions
Maximum tota ...
Other materials:
Keyless access with push-button start system (if equipped)
The keyless access with push-button start
system allows you to perform the following
functions when you are carrying the
access key.
Locking and unlocking of the doors and
rear gate
Starting and stopping the engine. For
detailed information, refer to "Starting and
stopping engine (mod ...
Driving tips
Do not drive with your foot resting on the
clutch pedal and do not use the clutch to
hold your vehicle at a standstill on an
upgrade. Either of those actions may
cause clutch damage.
Do not drive with your hand resting on the
shift lever. This may cause wear on the
transmission components.
...
Dtc p0032 a/f / o2 heater control circuit high bank 1 sensor 1
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0032 A/F / O2 HEATER CONTROL CIRCUIT HIGH BANK 1 SENSOR 1DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode ...
