Subaru Crosstrek Service Manual: Operation
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Read Current Data
OPERATION
1. On «Start» display, select «Diagnosis».
2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
3. On «Main Menu» display, select «Each System».
4. On «Select System» display, select «Air Conditioner» and select «Enter».
5. On «Select Function» display, select «Data Monitor».
NOTE:
For detailed operation procedures, refer to “Application help”.
List
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Read Current DataLISTItems to be displayedUnit of measureContentsNoteIn-vehicle Sensor Temperature°C (°F)A/C control panel input value â ...
Basic diagnostic procedure Procedure
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Basic Diagnostic ProcedurePROCEDURENOTE:When the sunload sensor check is performed indoors or in the shade, it could be diagnosed as sensor having an open cir ...
Other materials:
Dtc p1531 battery current sensor circuit high
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P1531 BATTERY CURRENT SENSOR CIRCUIT HIGHDTC detecting condition:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION&q ...
Operation
HI - Rapid heating
LO - Normal heating
Off
Left-hand side
Right-hand side
To turn on the seat heater, push the "LO"
or "HI" position on the switch, as desired,
depending on the temperature.
Selecting the "HI" position will cause the
seat to heat up quicker.
To turn off ...
Inspection
BRAKE > Rear Brake PadINSPECTION1. Check the pad thickness.NOTE:• Always replace the pads of both wheels and both sides as a set.• Replace pad clips if they are twisted or worn.• Replace the pad if there is oil or grease on it.• A wear indicator is installed on the pad - d ...
