Component
InstallationDisassembly
DRIVE SHAFT SYSTEM > Rear AxleDISASSEMBLY1. BUSHING - REAR AXLE HOUSINGDo not remove the bushing - rear axle housing from the rear axle housing, because it cannot be replaced. If removed, replace the rear axle housing.2. REAR BUSHING1. Remove the rear axle housing. Rear Axle > REMOVAL"&g ...
Assembly
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Main Shaft AssemblyASSEMBLY1. When the sleeve & hub assemblies have been disassembled, reassemble by aligning the alignment marks.NOTE:Position the open ends of the spring 120° apart.(A)3rd-4th coupling sleeve & synchronizer hub ASSY( ...
Disassembly
BRAKE > Master CylinderDISASSEMBLY1. Remove the reservoir tank.CAUTION:Be careful not to tighten a vise excessively.(1) Place the master cylinder assembly between aluminum plates and fix it on a vise.(2) Drive out the pin using a punch and a hammer to remove the reservoir tank.2. Remove the seal ...