Subaru Crosstrek Service Manual: Installation
SECURITY AND LOCKS > Rear Lock Button
INSTALLATION
CAUTION:
Make sure that the harness grommet is securely installed.
If not properly installed, this may cause leaks.
Install each part in the reverse order of removal.
Removal
SECURITY AND LOCKS > Rear Lock ButtonREMOVALNOTE:The rear lock button is integrated into the rear gate opener button.1. Disconnect the ground cable from battery. NOTE">2. Remove the garnis ...
Other materials:
Periodic inspections
To ensure that your Subaru Ascent remains in peak operating condition throughout
its service life, it is essential to strictly follow the recommended maintenance
schedule. All inspections and servicing procedures outlined in the "Warranty and
Maintenance Booklet" should be carried ou ...
Drain filter Specification
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > Drain FilterSPECIFICATIONThe leak check valve assembly is a non-disassembled part. Do not remove the drain filter from the leak check valve assembly. Refer to “Leak Check Valve Assembly” for removal and installation procedures. ...
Fastening the seatbelt
Front seatbelts
1. Adjust the seating position in the Subaru Ascent according to the following
guidelines.
Driver's seat: Set the seatback to an upright position and move the seat as far
back from the steering wheel as possible while maintaining full control of the vehicle.
Front passenge ...
