Subaru Crosstrek Service Manual: Installation
LIGHTING SYSTEM > Room Light
INSTALLATION
Install each part in the reverse order of removal.
Removal
LIGHTING SYSTEM > Room LightREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - room.CAUTION:When using a flat tip screwdriver, apply protective tape o ...
Other materials:
If your vehicle is involved in an accident
CAUTION
If your vehicle is involved in an
accident, be sure to inspect the
ground under the vehicle before
restarting the engine. If you find that
fuel has leaked on the ground, do
not try to restart the engine. The fuel
system has been damaged and is in
need of repair. Immediately contact
...
Dtc p0198 engine oil temperature sensor "a" circuit high
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0198 ENGINE OIL TEMPERATURE SENSOR "A" CIRCUIT HIGHDTC detecting condition:Immediately at fault recognitionTrouble symptom:• Hard to start• Improper idling• Poor driving performanc ...
To arm the system using power door locking switches
1. Close all windows.
2. Remove the key from the ignition
switch (models without "keyless access
with push-button start system")/turn the
push-button ignition switch to the "OFF"
position (models with "keyless access with
push-button start system").
3. Open the doors and get out of the
v ...
