Subaru Crosstrek Service Manual: Installation
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Throttle Body
INSTALLATION
Install in the reverse order of removal.
NOTE:
Use a new gasket.
Tightening torque:
8 N·m (0.8 kgf-m, 5.9 ft-lb)
Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Throttle BodyREMOVAL1. Disconnect the ground cable from battery.2. Lift up the vehicle.3. Remove the under cover. Front Under Cover > REMOVAL">4. D ...
Other materials:
Installation
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > CondenserINSTALLATIONCAUTION:• If the condenser assembly - air conditioner has been replaced, add an appropriate amount of compressor oil. Compressor Oil > ADJUSTMENT">• Replace the O-rings with new parts, and then apply compresso ...
Starting engine
WARNING
There are some general precautions
when starting the engine.
Carefully read the precautions
described in "General precautions
when starting/stopping engine"
F7-9.
If the indicator on the pushbutton
ignition switch flashes in
green after the engine has
started, never dri ...
Installation
EXTERIOR BODY PANELS > Rear GateINSTALLATION1. REAR GATE PANELCAUTION:The panel - rear gate is heavy. When removing and installing it, always work in a team of two or more persons.1. Install the hinge - rear gate to the vehicle body.2. Temporarily install the panel - rear gate to the hinge - rear ...
