Subaru Crosstrek Service Manual: Tumble generator valve actuator

Installation

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Throttle BodyINSTALLATIONInstall in the reverse order of removal.NOTE:Use a new gasket.Tightening torque:8 N·m (0.8 kgf-m, 5.9 ft-lb) ...

Inspection

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve ActuatorINSPECTION1. Check that the tumble generator valve actuator has no deformation, cracks or other damages.2. Check tumble generato ...

Other materials:

Operation
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF) > Sunroof Control SystemOPERATION1. INITIALIZE OPERATIONCAUTION:During initialization, perform the position learning and the sliding learning. Sliding learning mode can not be initiated unless the position learning is performed.NOTE:When initialize operatio ...

Installation
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Front Differential AssemblyINSTALLATION1. Install the differential side retainers using ST.ST 18630AA010WRENCH COMPL RETAINER2. Install the taper roller bearing outer race to the transmission case.3. Install the front differential assembly.NOTE:Be ca ...

Dtc p2747 intermediate shaft speed sensor "b" circuit no signal
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P2747 INTERMEDIATE SHAFT SPEED SENSOR "B" CIRCUIT NO SIGNALDTC detecting condition:Immediately at fault recognitionTrouble symptom:• Standing start problems• Shock o ...