VEHICLE DYNAMICS CONTROL (VDC) > Vehicle Dynamics Control System
INSPECTION
Refer to the “Vehicle Dynamics Control System (VDC) (DIAGNOSTICS)”. General Diagnostic Table > INSPECTION">
Installation
LUBRICATION(H4DO) > Oil PanINSTALLATION1. OIL PAN1. Apply liquid gasket to the mating surface of the oil pan upper as shown in the figure, and install the oil pan.NOTE:• Before applying liquid gasket, degrease the old liquid gasket seal surface of the oil pan and the oil pan upper.• U ...
Removal
STARTING/CHARGING SYSTEMS(H4DO) > BatteryREMOVAL1. Disconnect the positive (+) terminal after disconnecting the negative (−) terminal of battery.2. Remove the battery cable holder from the battery rod.3. Remove the flange nut from battery rod and remove battery holder.4. Remove the battery. ...
Disassembly
BRAKE > Master CylinderDISASSEMBLY1. Remove the reservoir tank.CAUTION:Be careful not to tighten a vise excessively.(1) Place the master cylinder assembly between aluminum plates and fix it on a vise.(2) Drive out the pin using a punch and a hammer to remove the reservoir tank.2. Remove the seal ...