MECHANICAL(H4DO) > Crank Sprocket
INSPECTION
1. Check the crank sprocket teeth for abnormal wear and scratches.
2. Make sure there is no free play between crank sprocket and key.
Crank sprocket
RemovalType C and D
1. Depress the "AUTO" button. The
indicator light "FULL AUTO" on the display
illuminates.
2. Set the preferred temperature using
the temperature control dial.
NOTE
The controllable temperature range
may vary depending on the regional
specifications of the vehicle.
If you operate any ...
Component
EXHAUST(H4DO) > General DescriptionCOMPONENT1. FRONT EXHAUST PIPE AND CENTER EXHAUST PIPE(1)Front exhaust pipe(12)Front exhaust pipe lower coverTightening torque: N·m (kgf-m, ft-lb)(2)Front catalytic converter(13)Front catalytic converter lower cover LHT1:13 (1.3, 9.6)(3)Center exhaust pip ...
Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Control PanelINSPECTION1. CHECK ILLUMINATION1. Check the illumination operation when battery voltage is applied between the terminals of control panel.• Manual A/C modelTerminal No.Inspection conditionsSpecificationConnection diagram14 (+) — 12 ( ...