Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Inspection

MECHANICAL(H4DO) > Crank Pulley

INSPECTION

1. Check that the crank pulley has no deformation, cracks or other damages.

2. Inspect for oil leakage from the front oil seal. If there is an oil leak, replace the front oil seal with a new one. Crank Pulley > REMOVAL">

Crank pulley
...

Removal
MECHANICAL(H4DO) > Crank PulleyREMOVALNOTE:When replacing a single part, perform the work with the engine assembly installed to body.1. When working on the vehicleNOTE:When working on the vehicle, ...

Other materials:

Disassembly
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > Leak Check Valve AssemblyDISASSEMBLY1. Remove the drain separator from the leak check valve assembly. Drain Separator > REMOVAL">2. Disconnect the drain tube from the leak check valve assembly.NOTE:Disconnect the quick connector ...

Initial screen
When the ignition switch is in the "ACC" or "ON" position, the initial screen will be displayed and the system will begin operating. When using the SUBARU STARLINK function (if equipped), the display screen may be different from the screen above. After a few seconds, the caution scr ...

Removal
LIGHTING SYSTEM > Headlight AssemblyREMOVALCAUTION:• Do not perform work with wet hands, because there is a possibility of electrical shock.• The HID type uses very high voltages for the lighting circuit. Make sure that the power supply is turned OFF before working.1. Disconnect the g ...

© 2016-2025 Copyright www.sucross.com